Subscribe to RSS Feed

Archive for October, 2012

Prevent Needing Furnace Repair in Seattle

 

When is the last time you replaced your furnace filter?

If you are unsure, then it has probably been too long. Like many people, you may have put it on your to-do list, but promptly forgot when life inevitably became hectic. Busy schedules can often keep us from the little necessities that we aren’t reminded of day-to-day.

Manufacturers of the newer filters recommend that you replace your filter every three months.

As a homeowner, it is important that you check your filter regularly.

If you have pets or anything else that may clog your furnace filter quickly, then you may find that you are changing it even more frequent than manufacturers recommend.

Not changing your furnace filter can cause many issues including safety hazards and increased cost to run your furnace.

If you are worried about the cost of changing a filter regularly, there are things you can do to extend the life of the filter you do have.

These things include vacuuming your filter out every month and putting it back in place. You can also be more diligent about keeping pet hair, dust, and dirt out of the house by sweeping and vacuuming every few days.

Replace your Furnace Filter regularly to avoid furnace repair

If you are in need of furnace repair or advice about your furnace filter, then hire Beacon Plumbing & Heating to be your Seattle heating expert!

We are a Seattle furnace repair expert that has been providing quality and affordable heating service to our clients all across the Puget Sound region.

Whether you need a new furnace, or you need furnace repair, we are here for you.

Any time you invite a company into your home to provide a service, you need to know that they are trustworthy, timely, and reliable.

Our skillful Seattle area heating experts do a great job and always put our customers at ease. We do extensive back ground screenings on all of our employees so that we know we are sending out the best of the best.

Our popularity in the Greater Puget Sound area has come from our transparency.

You will always know how much your service is going to cost. We believe in being up front and honest, so that you can make the right choice based on your budgetary restrictions.

Call Beacon Plumbing & Heating today for all your heating needs!

The Beacon Plumbing & Heating website was built by this Seattle web design company.

Continue Reading »
No Comments

Keep a Restaurant Cozy with Seattle’s Heating Repair Service

If you are a restaurant owner in Seattle, then you know it is about that time of year when you must start thinking about heating your restaurant.

Doing so will ensure that you have a happy staff and happy customers throughout the fall and winter seasons. Patrons love to escape the cold, crisp air and relax in a warm and comfortable atmosphere where they can find good food and good service. Being able to offer this to them will make you one of the go-to places in Seattle.

If you haven’t had heat because something is wrong with your heat source, then give Beacon Plumbing and Heating a call.

Getting it fixed right now will save you a lot of head ache and frustration later. There are some big benefits to having a working heat source, including saving money. A heat source that is running right is much more economical than one that is near broken or broken.

The second biggest benefit to having a working heat source is safety. As a business owner, you know how important your staff and your customers safety is. Not caring could cost you your business, and more.

By hiring someone to make sure your heat source is correctly running, you are protecting people from potential carbon monoxide emissions and other dangers.

Beacon Plumbing and Heating is Seattle’s Top Choice!

Since 1999 Beacon Plumbing and Heating has been the best Seattle restaurant heating repair provider.

The reason they are so popular is because they have fantastic customer service! They always have their customers comfort in mind, and put them first by providing 24/7service as well as other time saving options.

They realize that their customers put their trust into Beacon Plumbing and Heating.

Because of this, they only hire the best of the best. Their heating technicians go through detailed screenings before employment, ensuring that you get a quality and safe person to come fix your heater.

They are also licensed, bonded, and insured.

All of these extra steps that Beacon Plumbing and Heating has taken is so that you can have the best experience possible and know that you have a great team of experts standing by you in the case of a heating or plumbing disaster!

In addition to restaurant heating repair, Beacon Plumbing and Heating also provides home owners the same amazing services.

To find out more about their services, or to get your restaurant heater serviced, call 206.452.3130 or visit www.beaconplumbing.netStop Freakin’….Call Beacon!

Their fun and functional website was designed and created by this Seattle web design company.

Continue Reading »
No Comments

Furnace Repair in Everett to Maintain Your Furnace

Many people have been commenting on how quickly the fall season has started.

Sure enough, it is nearing the end of October, and that means more than candy and costumes.

The end of October is also marked by increasingly cold temperatures and the need for a quality and working heat source.

Since most people haven’t been using their furnace since last winter, it is important to get yours checked and maintained by a professional before you begin to use it.

Getting your furnace checked and maintained will save you money in the long run because it will ensure that no big problems occur with your heat source. It will also keep your family safe throughout fall and winter, as many accidents occur every year because of a ill working furnace.

When you begin your search for a quality heating expert, it will be wise to contact Beacon Plumbing and Heating. They are a popular Everett furnace repair provider that has been providing the Puget Sound affordable and fast service since they opened in 1999.

Because of their fast service, they are an attractive option to home owners or business owners who have put off getting their furnace maintained until now.

In addition, they are available to help 24/7. That means that if something happens to your furnace, you can get a Beacon Plumbing and Heating technician out to fix it right away.

Dependable Furnace Installation in Everett

In addition to furnace repair, Beacon Plumbing and Heatingalso offers furnace installation. This is a great option for new home owners or business owners who are in need of a quality heat source at an affordable price.

Their heating technicians are professional, timely, and always pass a pre-employment screening.

They offer a one year guarantee on heating parts and labor. They also offer same day service.

More importantly, their heating technicians are passionate about what they do.

Because of that passion, they are willing and able to answer your questions regarding the best heating option for your household or your business.

Stop Freakin’…Call Beacon!  at 425.329.7875 or visit their website at www.beaconplumbing.net.

They are more than happy to answer any questions you have regarding furnace maintenance or installation, and the costs that are associated with both.

The Beacon Plumbing and Heating website was designed and built by this Seattle web design company.

Continue Reading »
No Comments

Seattle Heat Pumps

Heating and air conditioning (HVAC) systems are important to every Seattle area home.

Our Seattle weather climate as we all know is damp, moist and cold from October to March or April each year.  HVAC systems that keep the climate inside our homes even and comfortable are always a topic of interest here in Seattle.

Most Seattle area homes use a system that combines a furnace and air ducts, integrated with a central air conditioning system. It’s a good combination and works well to maintain the home comfort we want.

Our home-heating gas furnaces, though, are sized to handle temperatures that we face here in the Seattle area.  Which means that during cool temperatures of spring and fall, the furnace system is over-sized, and runs for only short periods.

If your homes furnace system is over-sized it’s wasting a lot of energy and provides heat that is not optimal during the spring and fall seasons.

Over the past 15 years or so, a new heat pump technology has been introduced into the residential and commercial heating market to solve over-sized furnace system problem and this solution also provides money-saving benefits to Seattle homeowners and businesses alike.

Central air conditioners and ductless air conditioning systems that incorporate heat pump technology now provide heat to warm homes in cool weather and air conditioning during hot weather.

These heat pump systems turn your HVAC system in to a hybrid system that use the resources build into the heat pump and now can provide the most economical source of energy to heat your home, depending on conditions.

Heat Pump Repair here in Seattle

Beacon Plumbing & Heating is a heat pump contractor in Seattle, WA.

We specialize in residential and commercial heat pump solutions for both heat and air throughout the entire Puget Sound region. If you suspect that your heat pump is not performing at its high efficient self then we will inspect your heat pump and do our best to repair your heat pump.

Between 15-30% of the time heat pump replacement is the best long term solution rather than investing your resources into a residential or commercial heat pump repair.

By deciding to install a heat pump in your home or business you are purchasing a central heating and cooling system that heats and also cools your home or business by using high efficient heating systems that are powered by using electricity.

These highly efficient systems will help you save money on your local utility costs.

Heat Pumps Can Replace:
• Wall Heaters
• Baseboard Heaters
• Oil Furnaces

Environmentally Eco Friendly Heat Pump Systems

A heat pump is a all-in-one cooling & heating system.  During the warm summers from July through September a heat pump system works like an air conditioner.

The heat pump will deliver heat from inside your home or business and transfers its warm air to the outside of your home or business.

When the weather gets cooler however starting in October, a heat pump is engineered to have the opposite effect and takes heat from outside and transfers and distributes it through your home or business.

Heat pumps provide a balance level of heat throughout your entire home or business. Which keeps your family or employee’s comfortable and more productive

At Beacon Plumbing & Heating we provide same day service on any heat pump service 24/7×365 days a year.

• Heat Pumps
• Heat Pump Repair
• Heat Pump Installation
• High Efficiency Heat Pumps
• Multiple Heat Pump Make & Models

Beacon Plumbing & Heating is licensed, bonded and insured. When you have problems call a Seattle Heat Pump Repair or Installation company you can trust,  Stop Freakin…Call Beacon!

Contact Seattles Best Heat Pump Company!

206.452.3130

Continue Reading »
No Comments

Seattle Heating Contractor Seattle Area Furnace Installation & Repair

At Beacon Plumbing & Heating we have sought to provide each of our customers in the Seattle Metro area with professional HVAC work at a very affordable price.  View our heating coupons online.

We are the local choice and a Seattle heating specialist for many residential and commercial customers.   Our Seattle Heating Company offers each potential customer a prompt and efficient furnace repair and furnace replacement alternative.

Our specialty is construction, fabrication and mechanical engineering solutions for your residential, commercial & industrial heating services.

We not only service all makes and models of heating equipment but also provide expert advise and energy saving solutions.

Since 1999 our Heating Experience has made the Difference

Stop Freakin…Call Beacon! 

Beacon Plumbing & Heating also is able to test your boiler or furnace as a professional and licensed Seattle heating contractor.

We are skilled in all heating systems and are licensed to perform repairs and installation on any residential or commercial heating system.

Your home or office heating will either be replaced with the highest quality furnace parts or replaced with the highest quality and industry standard heat replacement systems.

We strive on each job to be a energy efficient advocate and are trained every season on the latest advancements and technologies taking place in the heating trade.

Our Heating Repair Services Include:
• Heating Contractor
• Boilers
• Furnaces
• Gas Furnaces
• Oil Furnace
• Furnace Parts and Replacement
• Radiant Heating

Our New Heating Installation Services Include:

• Gas Furnaces
• Hydronic Heating
• New Boiler or New Furance
• Piping
• Radiant Floor Heating

The Pacific Northwest provides moist wet weather conditions.

No matter what the weather is like here in the Pacific Northwest be assured that your home or commercial structure will maintain a comfortable and efficient heat source with a Beacon Plumbing & Heating installed furnace or boiler system.

Our home heating team will take no shortcuts when it comes to installing a safe heating service for your family.

Heating Sales Heating Repair Service Heating Installation

Each member of our experienced Seattle area heating technician team will work with each customer on a one on one basis and implement the best heating device for the floor plan of each level of your structure.

Whether you choose a furnace replacement or choose to select our furnace repair option please be assured that heating job will be installed or repaired by a certified heating contractor that is licensed and bonded.  Stop Freakin….Call Beacon!

If you are looking to replace your old electric or oil burning furnaces then we have very affordable and competitive prices that are energy efficient and are a perfect option in meeting your goals for a lower monthly heating bill.

Don’t let the harsh winter weather pass you by without experiencing the comfort and relaxing of our clean burning technologies.

• Floor Heating
• Electric Furnaces
• Heating Repair
• Boiler Systems

Local Heating Services in Seattle, WA

Beacon Plumbing & Heating is a energy efficient advocate and has been a experienced HVAC contractor  in Seattle since 1999.

Our combination of Plumbing and Heating experience has allowed us to grow a very large customer base in the residential and commercial heating industry.

We not only install new furnaces and heating systems in new homes and businesses, we are also very highly qualified in regards to retro-fit heating installations.

We are experts in total house re-piping installations.

As a local HVAC expert we have worked on homes that were 100 years old and the most contemporary heating systems being installed in today’s heating marketplace.

We are a foremost expert in re-piping your home and replacing the old galvanized steel pipe systems.  We have developed relationships with General Contractors that has been gained from years of dependable and timely service.

Numerous commercial property management companies and homeowner associations rely upon our expertise for boiler installation and repair and in-floor heating service and repair.

• Project Development
• Boiler and Burner Service and Repair
• Heating Equipment Upgrades
• Home Furnaces
• Heating Systems

Beacon Plumbing is licensed, bonded and insured. When you have home or business heating problems call a Seattle Heating Contractor you can trust, Stop Freakin…Call Beacon!
Contact Seattles Best Heating Company!

206.452.3130

Continue Reading »
No Comments

Hire a Quality Furnace Repair Company in Seattle

If not, you might want to get in touch with a quality Seattle furnace repair company.

If you’ve caught the news lately, then you know that the fall season is truly in swing.

The forecasts are predicting rain and cold temperatures over the next few weeks. This means unless you have your heat source maintained and working, you will be experiencing some cold nights and even colder mornings.

If you are looking for a furnace repair provider, there are some things that you want to look out for.

Obviously, finding a reputable heating company will be at the top of your list. But what does that mean, exactly? A reputable heating company is one that has been around for a while, showing you that they have had a steady stream of satisfied clients.

Because a heating technician will be coming to your home or business, you want to make sure that the company screens their employees.

Lastly, you want to look for a place that lets you know up front how much their service will cost. Some heating companies like to charge without letting you know how much it will cost, leaving you stuck with a larger bill than you expected.

A good furnace company will always be up front about billing and help you find an option that works for you.

Furnace Repair in Seattle

One furnace repair company that has all the above qualities and more, is Beacon Plumbing and Heating in Seattle, Washington.

 

We have been one of the most popular companies in the Seattle area since 1999, making our customers warm and happy!

All of our qualified and friendly heating technicians are carefully screened, allowing you to take comfort in their credibility.

Beacon Plumbing and Heating is also affordable. We believe in honestly and transparency when speaking with you about billing.

We appreciative your business, and in turn provide the best service possible.

Our service is so great in fact, that we offer same day service 24/7  to our customers. This is a fantastic option for those that have waited until after the fall chill has arrived before getting their furnace maintained.

 

Stop Freakin…Call Beacon Today! at 206.452.3130 or visit our website at www.beaconplumbing.net. We are more than happy to answer any questions you have regarding heating and furnace maintenance or installation.

Their fun and functional website was created and built by this Seattle Web Design company.

Continue Reading »
No Comments

Furnace Repair in Tacoma to Maintain Your Homes Heat

It’s the first week of October and the weather has started changing. Most houses are eating the last of summer produce, closing their windows at night, and adding an extra blanket to their bed in the early morning hours.

The chill of fall is also letting us know that it is time to start our furnaces back up again. If you haven’t used your furnace since winter, it might be a good idea to check to see if you need any maintenance work done before you begin to use it.

Many people put checking on their furnaces off because they are worried that they won’t get quality service, or if they do get quality service, that it will cost them an arm and a leg. That does not need to be the case!

Beacon Plumbing and Heating is a popular Tacoma furnace repair provider.

Beacon Plumbing and Heating has been a favorite among Tacoma and surrounding area residents since it opened in 1999.

Their quality service and affordability make them an attractive option for home owners who don’t want to sacrifice quality for a good deal. The best part? They are available 24/7! This means that if you have put off getting your furnace repaired, and you are starting to feel the chill, then you can get immediate service.

Dependable Furnace Installation in Tacoma

In addition to furnace repair, Beacon Plumbing and Heating also offers furnace installation. When you decide to go with this trusted company, they will not let you down.

Their technicians are professional, timely, and always pass a pre employment screening. They offer a one year guarantee on heating parts and labor. They also offer same day service. More importantly, their technicians are passionate about what they do. Because of that passion, they are willing and able to answer your questions regarding the best heating option for your household.

Beacon Plumbing and Heating understands that you have a very busy schedule. They will work around your day and make sure that they find a convenient time. The temperatures are changing fast, so don’t let your family go without a working furnace.

Give Beacon a call today at 253-655-4599 or visit their website at www.beaconplumbing.net. They are more than happy to answer any questions you have regarding furnace maintenance or installation.

Their fun and functional website was created and built by this Seattle Web Design company.

Continue Reading »
No Comments

Stay in Tune

    Twitter

    Follow Me on Twitter!

    Recent Comments